When you get around to reapplying your Aussie Clear decking oil after 9-12 months, there are a few simple things you should do before hand to ensure fantastic results. Penetrative timber finishes applied over a poorly prepared deck or any other exterior timber, will result in very poor results. Correct timber preparation prior to oiling your deck will ensure fantastic results.
timber finishes | timber treatmentPreschem has recently re-released it’s Radial Timber Sealer product. However, it’s a new high tech formulation from the ground up! This wood finish was originally designed for Radial Timber* projects, where the architect or customer wished the timber to weather off to that silver-grey look, while protecting it from the elements. As far as timber finishes go this is a specialist product and as such, may not be very well understood. Hopefully this post will explain clearly the features of Radial Timber Sealer. We’ll start at the beginning which means a quick lesson on timber and dimensional stability.
All wood has a natural moisture content. This moisture content varies significantly depending on a number of factors such as is it “green” meaning unseasoned through to being properly processed and dried such as kiln dried. Typically Australian Eucalypt timber that’s “green” has a moisture content (MC) as high as 80%. Kiln dried timber will be between 11-15%.
The significance of this is when timber changes MC it shrinks if it’s drying, but expands if it takes up moisture. Rapid changes in MC can cause issues such as warping, cupping, splitting and checking. What happens is the outer surface shrinks or expands rapidly, but the timber under that surface takes longer to change MC, so internal stresses are created. This is dimensional instability and is to be avoided where possible. When timber is processed from green to kiln dried, it is done slowly and carefully to avoid this. However, even timber that has been properly kiln dried can still have splitting and checking occur when its placed in a weather exposed situation, especially without any finish applied. The wood will still adjust it’s MC to its environment and this process is called seasoning. Seasoning will also cause dimensional stability issues.
Where the ultimate goal is to have the timber weather off to a pleasing silver-grey but prevent the issues of splitting, cupping and checking. You thus need a timber finish or wood treatment such as Radial Timber Sealer. Its key features are:
If you wish to maintain the timber’s “new look” rather than allow it to go grey, then the timber finish product to use is Aussie Clear for mid to dark toned hardwoods, or Aussie Clear Light for blond and lightly coloured timber. Exterior Pine Clear is the recommended product for Treated Pine.
* Radial Timber Sales is the wholesale/retail arm of Radial Timber Australia. Both companies are part of our wider business group. The Radial technology of cutting sawlogs is unique technology that allows very high yields from smaller plantation or new growth logs, while improving dimensional stability. Visit radialtimbers.com.au for more information on the technology and product profiles.
One common question asked by the public is how to conduct a window repair when its affected by wood decay. The next question always is, what’s a suitable wood preservative when the window repair is to be painted over. The answer is quite simply: No Rot Gel.
The cause of the wood decay, or dry rot is typically due to the paint system starting to break down by cracking or peeling. This allows moisture to get into the timber when it rains thus allowing the onset of timber decay. To remedy this it is recommended that you apply a suitable wood preservative such as Preschem’s No Rot Gel:
The advantage of No Rot Gel being used in this way is that it will kill and sanitise any dormant or active wood rot including the tendrils that are looking for another spot to grow. In addition, the timber preservative is locked in under the paint, where the boron active ingredient will remain there indefinitely, waiting for such a time where moisture starts finding its way back into the timber. Obviously if you’re properly maintaining your painting, then this could be a very long time indeed, as dry wood won’t rot.
Note: If you’re wanting a timber treatment for exterior use that won’t be painted over, then Timber Preserver is product to use.
For those of you who live within the Melbourne metro region and wish to have a tradesman come and do the work for you, then I recommend that you contact the Wood Rot Doctor to discuss your repair requirements on 1800 641 711 or visit the website at woodrotdoctor.com.au
One of the most common mistakes when people apply Aussie Clear as a decking oil onto new Merbau timber, is that people don’t properly read the application instructions. The instructions read: “allow new Merbau timber to weather for 6 to 8 weeks prior to applying Aussie Clear” and “… any excess oil remaining on the surface after 2 hours should be wiped off.”
Over oiled Merbau deck. Note the sheen which should not occur if Aussie Clear is correctly applied.
The reason for this is two fold:
If the timber is new then when you apply any decking oil product, those resins will mean you won’t get as much of the oil into the timber. It is preferable to allow it to weather for 6-8 weeks, or wash it regularly with fresh water if under cover for about the same period. It’s the water that bleeds the resins out of the timber. In other words, timber finishes work best when you allow the timber to weather. When you do this, your first application of Aussie Clear will be a proper “dose” and should last between 9-12 months (depending on exposure).
However, there is one exception to this where Preschem would recommend oiling the timber straight away, and that’s if the deck has been completed in the middle of a heat wave. In this instance, put one very light coating of Aussie Clear down immediately, as this will prevent the timber rapidly drying which can cause dimensional instability resulting in cupping, splitting and checking. However, this light application will not last all that long for the reasons explained above, so you will need to reapply sooner than what would normally be expected.
Over oiled Merbau decking. Note the film is wearing off quickly.
When applied correctly to a timber deck using a lambswool applicator, Aussie Clear decking oil will not form a film. If there is an excess on the timber, then that oil forms a film on the timber if it’s not removed with a clean dry rag. This film actually looks quite pleasing, so the common mistake is to keep re-applying the oil until its a “nice” looking finish. This film can occur with any timber, but is more likely to occur with new Merbau due to it’s high resin content.
The problem with this is that the film is not durable. It’s very easy to scratch and scuff the surface, which is a common complaint when this occurs. This is especially true on a hot day, as the coating softens significantly with heat.
Aussie Clear is designed to be a true penetrative matte wood finish. It will protect and enhance the timber through it’s proven formulation by:
